|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STB13NM50N/-1 - STF13NM50N STP13NM50N - STW13NM50N N-channel 500V - 0.250 - 12A - TO-220/FP - TO-247-I2/D2PAK Second generation MDmeshTM Power MOSFET Features Type STB13NM50N STB13NM50N-1 STF13NM50N STP13NM50N STW13NM50N VDSS (@Tjmax) 550V 550V 550V 550V 550V RDS(on) <0.32 <0.32 <0.32 <0.32 <0.32 ID 3 12A 12A 12A(1) 12A 12A TO-220 1 2 3 12 IPAK TO-247 3 1 2 3 1 1. Limited only by maximum temperature allowed 100% avalanche tested Low input capacitance and gate charge Low gate input resistance TO-220FP DPAK Internal schematic diagram Description This product is realized with the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout to yield one of the world's lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters Application Switching application Order codes Part number STB13NM50N-1 STB13NM50N STP13NM50N STF13NM50N STW13NM50N Marking B13NM50N B13NM50N P13NM50N F13NM50N W13NM50N Package IPAK DPAK TO-220 TO-220FP TO-247 Packaging Tube Tape & reel Tube Tube Tube May 2007 Rev 2 1/17 www.st.com 17 Contents STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 6 Test circuit ............................................... 9 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Electrical ratings 1 Electrical ratings Table 1. Symbol Absolute maximum ratings Value Parameter TO-220/TO-247 DPAK/IPAK 500 25 12 6 48 100 15 -2500 12 (1) 6 (1) 48 (1) 25 Unit TO-220FP V V A A A W V/ns V VDS VGS ID ID IDM (2) PTOT dv/dt (3) VISO Tj Tstg Drain-source voltage (VGS=0) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Operating junction temperature Storage temperature -55 to 150 C 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 12A, di/dt 400A/s, VDD =80% V(BR)DSS Table 2. Symbol Thermal data Value Parameter TO-220/TO-247 DPAK/IPAK 1.25 62.5 300 Unit TO-220FP 5 C/W C/W C Rthj-case Rthj-amb Tl Thermal resistance junction-case max Thermal resistance junction-amb max Maximum lead temperature for soldering purpose Table 3. Symbol IAS EAS Avalanche characteristics Parameter Avalanche current, repetitive or notrepetitive (pulse width limited by Tj max) Single pulse avalanche energy (starting Tj=25C, ID=IAS, VDD= 50V) Max value 3.5 200 Unit A mJ 3/17 Electrical characteristics STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 4. Symbol V(BR)DSS dv/dt(1) IDSS IGSS VGS(th) RDS(on) 1. On/off states Parameter Drain-source breakdown voltage Drain-source voltage slope Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1mA, VGS= 0 Vdd=400V,Id=12A, Vgs=10V VDS = Max rating, VDS = Max rating,Tc=125C VGS = 20V VDS= VGS, ID = 250A VGS= 10V, ID= 6A 2 3 0.25 Min. 500 30 1 100 100 4 0.32 Typ. Max. Unit V V/ns A A nA V Characteristics value at turn off on inductive load Table 5. Symbol gfs(1) Ciss Coss Crss Coss eq.(2) Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Gate input resistance Test conditions VDS =15V, ID= 6A Min. Typ. 8 960 50 5 110 Max. Unit S pF pF pF pF VDS =50V, f=1MHz, VGS=0 VGS=0, VDS =0V to 480V f=1MHz Gate DC Bias=0 test signal level=20mV open drain VDD=400V, ID = 12A VGS =10V (see Figure 18) Rg Qg Qgs Qgd 1. 5 Total gate charge Gate-source charge Gate-drain charge 30 5 15 nC nC nC Pulsed: pulse duration = 300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 4/17 STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Electrical characteristics Table 6. Symbol td(on) tr td(off) tf Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD=250V, ID=6A, RG=4.7, VGS=10V (see Figure 17) Min. Typ. 30 15 40 10 Max. Unit ns ns ns ns Table 7. Symbol ISD ISDM (1) VSD(2) trr Qrr IRRM trr Qrr IRRM Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD=12A, VGS=0 ISD=12A, VDD=100V di/dt = 100A/s,Tj=25C (see Figure 19) ISD=12A,VDD=100V di/dt=100A/s,Tj=150C (see Figure 19) 300 3 22 370 4 22 Test conditions Min Typ. Max 12 48 1.3 Unit A A V ns C A ns C A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300s, duty cycle 1.5% 5/17 Electrical characteristics STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N 2.1 Figure 1. Electrical characteristics (curves) Safe operating area for TO-220 / DPAK / IPAK Figure 2. Thermal impedance for TO-220 / DPAK / IPAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Safe operating area for TO-247 Figure 6. Thermal impedance for TO-247 6/17 STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Figure 7. Output characteristics Figure 8. Electrical characteristics Transfer characteristics Figure 9. Transconductance Figure 10. Static drain-source on resistance Figure 11. Gate charge vs gate-source voltage Figure 12. Capacitance variations 7/17 Electrical characteristics STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Figure 14. Normalized on resistance vs temperature Figure 13. Normalized gate threshold voltage vs temperature Figure 15. Source-drain diode forward characteristics Figure 16. Normalized BVdss vs temperature 8/17 STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Test circuit 3 Test circuit Figure 18. Gate charge test circuit Figure 17. Switching times test circuit for resistive load Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test switching and diode recovery times circuit Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform 9/17 Package mechanical data STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/17 STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Package mechanical data TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 11/17 Package mechanical data STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 12/17 G STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. DIM. MIN. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 TYP MAX. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 MIN. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 TYP. MAX. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch 13/17 Package mechanical data STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 14/17 STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Packaging mechanical data 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 15/17 Revision history STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N 6 Revision history Table 8. Date 18-Dec-2006 08-May-2007 Revision history Revision 1 2 First release Added TO-247 Changes 16/17 STB13NM50N/-1 - STF13NM50N - STP13NM50N - STW13NM50N Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17 |
Price & Availability of STB13NM50N |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |